Remote test fixture for hand feeding axial, radial or bandoliered components. The cable is terminated with four colour-coded BNC connectors. The fixture incorporates a push button switch and a jack plug for triggering the measurements when the instrument is in 'single
measurement' mode.
Telecom Fixture model 1008 further enhances the test capability of the
3261A Telecom Unit by providing an interface to connect units under test such as transformers.
A wide variety of telecom-related measurements can be carried out using the
3261A, 3260B Precision Magnetics Analyzer
and the 1008.
The 1009 High Current Fixture enables a DC bias current of up to 50 A to be applied to an SMD inductor during component test.
The fixture has been designed to work specifically with one or two
3265B/25A DC Bias Units and a
3260B or
3255B Inductance Analyzer.
If the 1009 is to be used with two 3265B/25As then the
high current lead set 5-328-2005 is also required
Interchangeable component test carriers ensures that the 1009 test fixture may be used with a wide variety of different devices.
Blank carriers are available which enable device
specific test fixtures to be developed or alternatively
a carrier design and manufacturing service is available.
Contact
sales@wayne-kerr.co.uk for further information.
BNC terminated lead with two pointed probes to access surface mounted devices (SMDs) on circuit boards. Additionally this accessory may be used for interfacing to hybrid components and chip components on tape.
